Tenor
Tenor
CASSignalingGroup line
RXGain : 2 db TXGain : 2 db AnswerDelay 45
CallerIDDetection 1 SilenceBasedDisconnect 60 ToneBasedSupervision 3 AnswerSupervisionMoreSensitive 1 AnswerSupervisionLessFilter 1
TCRG
TrunkCircuitRoutingGroup-line ForcedRoutingNum 1 MaxHopoffCallsAllowed 3 UserAgentAttached UserAgent-101
Hopoff Number Directory
The Hopoff (LAM) Pattern is used to set number patterns. When a number matches a pattern, that number is allowed to go out to the PSTN from the IP network. Numbers are matched from the IP network for this parameter based on the International number format (country code + city/area code + number).
Quintum-HopoffNumberDirectory-1# print
HopoffNumberDirectory-1 :
id : 1 name : (Not Set) name HopoffRoutingPriority : 8 priority RegisterDN : 1 registers DNs
HopoffNumber Table
index Pattern Replacement NumType TON NPI ----- ------------------------ ------------------------ ------- ---- ---- 1 0 0 0 0 0 2 1 1 0 0 0 3 2 2 0 0 0 4 3 3 0 0 0 5 4 4 0 0 0 6 5 5 0 0 0 7 6 6 0 0 0 8 7 7 0 0 0 9 8 8 0 0 0 10 9 9 0 0 0
config-HopoffNumberDirectory-1# add 0 r 0
HopoffNumber Table
index Pattern Replacement NumType TON NPI ----- ------------------------ ------------------------ ------- ---- ---- 1 0 0 0 0 0
SIP Configuration
SIPSignalingGroup
Quintum-SIPSignalingGroup-1# print
SIPSignalingGroup-1 :
SIPInfoFormat : 0 Nortel,default ProxyFailoverBehavior : 1 fail over PrimarySIPServerPort : 5060 portnumber,def 5060 PrimarySIPServer : X.X.X.X IP address SecondarySIPServerPort : 5060 port number,def 5060 SecondarySIPServer : (Not Set) IP address OutboundPrimaryServerPort : 5060 port number,def 5060 OutboundPrimaryServer : (Not Set) IP address OutboundSecondaryServerPort : 5060 port number,def 5060 OutboundSecondaryServer : (Not Set) IP address RegisterExpiryTime : 300 seconds,def 300 AllowOnlyProxyCalls : 0 all calls SDPin180Ringing : 1 send SDP SIPServerInFromHdr : 0 use Tenor IP SDPin183Progress : 1 yes,default IncludeQuintumHeader : 1 enable,default UserNameInContact : 1 contact info sent RequestReTransmitCount : 6 default 11 UserNameAsURI : 0 disable,default MaxForwards : 70 default 70 PRACKMethod : 1 supported Send180Ringing : 1 enabled Send183Progress : 1 enabled SipPstnInterworking : 1 enabled SIPNoConnectTimeout : 180 seconds,def 180 SessionTimer : 0 disabled UserAgentHeader : (Not Set) 0-31 char,def Quintu MWIServer : (Not Set) IP address MWIServerPort : 5060 Numeric,default 5060 MWISubscribeDuration : 60 minutes,def 60 MWIFailureRetryDelay : 30 minutes,def 30 CLIHeaderType : 0 disabled UseFromContact : 1 SIPTelephoneEvents : 1 Append "/1" to SDP a SIPUseDNinRegister : 1 Use DN from channel DirectGWRouting : 0 ConferenceFactoryName : (Not Set) ConferenceFactoryServer : (Not Set) ConferenceFactoryPort : 5060 SIPRegisterOnBootup : 0
UserAgent Table (132-character wide)
index UA ListenPort PrimaryUser PrimaryPassWord SecondaryUser SecondaryPassWord MWIUserName MWIPasswordEnabled
----- --- ---------- ---------------- ---------------- ---------------- ----------------- ---------------- -----------------------
1 101 5060 tenor-pp tenor-pp (Not Set) (Not Set) (Not Set) (Not Set)1
Contacts[1]: (Not Set)
Contacts[2]: (Not Set)
add new UA
add lp {ListenPort}pu {PrimaryUser}ppw {PrimaryPassWord}su {SecondaryUser}spw {SecondaryPassWord} mwiun{MessageWaitingIndicationUserName} mwip{MessageWaitingIndicationPassword}c[1 | 2] {Contacts}
change existing UA
change{index}pu {PrimaryUser}ppw {PrimaryPassWord}su {SecondaryUser}spw {SecondaryPassWord} mwiun{MessageWaitingIndicationUserName} mwip{MessageWaitingIndicationPassword}c[1 | 2] {Contacts}
remove index
remove{index}
Analog Interface
AnalogInterface line Quintum-AnalogInterface-line# print
AnalogInterface-line :
name : FXO analog interfaceUp to 32 Chars Type : 1 line PortNumber : 2 read only; defines p Channels : 8 Available Channels IPExtension : 0 Disabled; default
Channel Mapping Table
Channel CG-line CG-cell ------- ------- ------- 1..8 X
map {lchan#}..{hchan#} cg {channel group name} or map {channel1},{channel2} cg {channel group name} or map {channel1},{lchan#}..{hchan#} cg {channel group name}
Dial Plan
Quintum-DialPlan-1# print
DialPlan-1 :
MAXDNlength : 20 max DN length MINDNlength : 2 min DN length LongDistancePrefix : (Not Set) Numeric string CarrierPrefixPattern : (Not Set) 101xxxx;x is 0 to 9 INTernationaLPrefix[1..8] : (Not Set) IntercomEnable : 0 No; default InterDigitTimeout : 4 secs; default DialPlanCountry : 0 Generic CCITT ProgressToneCountry : 0 US AllowUnmatchedNumbers : 0 CountryCode : (Not Set) digits 1 to 7 AreaCode : (Not Set) Numeric String
Gateway
GateWay-1 :
Description : Tenor AX Gateway product name, max 31 OutgoingIPRouting : 1 SIP only
Codec
VoiceCodec-1 :
name : (Not Set) name CodecVoiceCoding : 8 G.711 A-Law CodecPayloadSize : 20 ms
VoiceCodec-2 :
name : (Not Set) name CodecVoiceCoding : 9 G.711 Mu-Law CodecPayloadSize : 20 ms
Related Document
Devices/Tenor/E1
