Tenor

از ویکی پارس پویش
پرش به: ناوبری, جستجو

Tenor

CASSignalingGroup line

 RXGain                       : 2                   db
 TXGain                       : 2                   db
 AnswerDelay                    45

CallerIDDetection 1 SilenceBasedDisconnect 60 ToneBasedSupervision 3 AnswerSupervisionMoreSensitive 1 AnswerSupervisionLessFilter 1


TCRG

TrunkCircuitRoutingGroup-line ForcedRoutingNum 1 MaxHopoffCallsAllowed 3 UserAgentAttached UserAgent-101


Hopoff Number Directory

The Hopoff (LAM) Pattern is used to set number patterns. When a number matches a pattern, that number is allowed to go out to the PSTN from the IP network. Numbers are matched from the IP network for this parameter based on the International number format (country code + city/area code + number).

Quintum-HopoffNumberDirectory-1# print

HopoffNumberDirectory-1 :

 id                           : 1
 name                         : (Not Set)           name
 HopoffRoutingPriority        : 8                   priority
 RegisterDN                   : 1                   registers DNs


 HopoffNumber Table
 index Pattern                  Replacement              NumType TON  NPI
 ----- ------------------------ ------------------------ ------- ---- ----
 1     0                        0                        0       0    0
 2     1                        1                        0       0    0
 3     2                        2                        0       0    0
 4     3                        3                        0       0    0
 5     4                        4                        0       0    0
 6     5                        5                        0       0    0
 7     6                        6                        0       0    0
 8     7                        7                        0       0    0
 9     8                        8                        0       0    0
 10    9                        9                        0       0    0


config-HopoffNumberDirectory-1# add 0 r 0

   HopoffNumber Table
   index Pattern                  Replacement              NumType TON  NPI
   ----- ------------------------ ------------------------ ------- ---- ----
   1     0                        0                        0       0    0


SIP Configuration

SIPSignalingGroup

Quintum-SIPSignalingGroup-1# print

SIPSignalingGroup-1 :

 SIPInfoFormat                : 0                   Nortel,default      
 ProxyFailoverBehavior        : 1                   fail over           
 PrimarySIPServerPort         : 5060                portnumber,def 5060 
 PrimarySIPServer             : X.X.X.X        IP address          
 SecondarySIPServerPort       : 5060                port number,def 5060
 SecondarySIPServer           : (Not Set)           IP address          
 OutboundPrimaryServerPort    : 5060                port number,def 5060
 OutboundPrimaryServer        : (Not Set)           IP address          
 OutboundSecondaryServerPort  : 5060                port number,def 5060
 OutboundSecondaryServer      : (Not Set)           IP address          
 RegisterExpiryTime           : 300                 seconds,def 300     
 AllowOnlyProxyCalls          : 0                   all calls           
 SDPin180Ringing              : 1                   send SDP            
 SIPServerInFromHdr           : 0                   use Tenor IP        
 SDPin183Progress             : 1                   yes,default         
 IncludeQuintumHeader         : 1                   enable,default      
 UserNameInContact            : 1                   contact info sent   
 RequestReTransmitCount       : 6                   default 11          
 UserNameAsURI                : 0                   disable,default     
 MaxForwards                  : 70                  default 70          
 PRACKMethod                  : 1                   supported           
 Send180Ringing               : 1                   enabled             
 Send183Progress              : 1                   enabled             
 SipPstnInterworking          : 1                   enabled             
 SIPNoConnectTimeout          : 180                 seconds,def 180
 SessionTimer                 : 0                   disabled
 UserAgentHeader              : (Not Set)           0-31 char,def Quintu
 MWIServer                    : (Not Set)           IP address
 MWIServerPort                : 5060                Numeric,default 5060
 MWISubscribeDuration         : 60                  minutes,def 60
 MWIFailureRetryDelay         : 30                  minutes,def 30
 CLIHeaderType                : 0                   disabled
 UseFromContact               : 1
 SIPTelephoneEvents           : 1                   Append "/1" to SDP a
 SIPUseDNinRegister           : 1                   Use DN from channel
 DirectGWRouting              : 0
 ConferenceFactoryName        : (Not Set)
 ConferenceFactoryServer      : (Not Set)
 ConferenceFactoryPort        : 5060
 SIPRegisterOnBootup          : 0


 UserAgent Table (132-character wide)
 index UA  ListenPort PrimaryUser      PrimaryPassWord  SecondaryUser    SecondaryPassWord MWIUserName      MWIPasswordEnabled
 ----- --- ---------- ---------------- ---------------- ---------------- ----------------- ---------------- -----------------------
 1     101 5060       tenor-pp         tenor-pp         (Not Set)        (Not Set)         (Not Set)        (Not Set)1
           Contacts[1]: (Not Set)
           Contacts[2]: (Not Set)


add new UA

add lp {ListenPort}pu {PrimaryUser}ppw {PrimaryPassWord}su {SecondaryUser}spw {SecondaryPassWord} mwiun{MessageWaitingIndicationUserName} mwip{MessageWaitingIndicationPassword}c[1 | 2] {Contacts}

change existing UA

change{index}pu {PrimaryUser}ppw {PrimaryPassWord}su {SecondaryUser}spw {SecondaryPassWord} mwiun{MessageWaitingIndicationUserName} mwip{MessageWaitingIndicationPassword}c[1 | 2] {Contacts}

remove index

remove{index}

Analog Interface

AnalogInterface line Quintum-AnalogInterface-line# print

AnalogInterface-line :

 name                         : FXO analog interfaceUp to 32 Chars
 Type                         : 1                   line
 PortNumber                   : 2                   read only; defines p
 Channels                     : 8                   Available Channels
 IPExtension                  : 0                   Disabled; default


 Channel Mapping Table
 Channel CG-line CG-cell
 ------- ------- -------
 1..8    X

map {lchan#}..{hchan#} cg {channel group name} or map {channel1},{channel2} cg {channel group name} or map {channel1},{lchan#}..{hchan#} cg {channel group name}

Dial Plan

Quintum-DialPlan-1# print

DialPlan-1 :

 MAXDNlength                  : 20                  max DN length
 MINDNlength                  : 2                   min DN length
 LongDistancePrefix           : (Not Set)           Numeric string
 CarrierPrefixPattern         : (Not Set)           101xxxx;x is 0 to 9
 INTernationaLPrefix[1..8]    : (Not Set)
 IntercomEnable               : 0                   No; default
 InterDigitTimeout            : 4                   secs; default
 DialPlanCountry              : 0                   Generic CCITT
 ProgressToneCountry          : 0                   US
 AllowUnmatchedNumbers        : 0
 CountryCode                  : (Not Set)           digits 1 to 7
 AreaCode                     : (Not Set)           Numeric String

Gateway

GateWay-1 :

 Description                  : Tenor AX Gateway    product name, max 31
 OutgoingIPRouting            : 1                   SIP only

Codec

VoiceCodec-1 :

 name                         : (Not Set)           name                
 CodecVoiceCoding             : 8                   G.711 A-Law         
 CodecPayloadSize             : 20                  ms                  

VoiceCodec-2 :

 name                         : (Not Set)           name                
 CodecVoiceCoding             : 9                   G.711 Mu-Law        
 CodecPayloadSize             : 20                  ms                  

Related Document

Devices/Tenor/E1


ابزارهای شخصی

گویش‌ها
فضاهای نام
عملکردها
گشتن
جعبه‌ابزار