Linksys PAP2
از ویکی پارس پویش
(تفاوت بین نسخهها)
(صفحهای جدید حاوی '<div dir=ltr lang=en> <big>linksysPAP2</big> <big><big>'''Reset to Default Fa...' ایجاد کرد) |
|||
| سطر ۴۳: | سطر ۴۳: | ||
If you want to use this device to login to queue by dialing "* *" and "*", you should add these character to dail plan: | If you want to use this device to login to queue by dialing "* *" and "*", you should add these character to dail plan: | ||
| + | '''(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|x**|x*)''' | ||
| − | |||
</div> | </div> | ||
نسخهٔ ۳ آوریل ۲۰۱۳، ساعت ۱۲:۰۸
linksysPAP2
Reset to Default Factory
Connect an analog phone to FXO port, pick it up and:
1- Dial ****
2- Dial 73738#
3- Press 1 to confirm
Get IP Address
Connect an analog phone to FXO port, pick it up and:
1- Dial ****
2- Dial 110#
Unlock PAP2
http://www.angelfire.com/droid/pap2/
Config PAP2
# Admin Login # Switch to Advanced View # Line 1 (or 2) # Set SIP server IP in Proxy field. # Set "Display Name", "User ID" and "Password"
If you want to use this device to login to queue by dialing "* *" and "*", you should add these character to dail plan:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|x**|x*)
