Asterisk Wholesale Service

نسخهٔ کنونی تا ‏۱۶ ژانویهٔ ۲۰۱۳، ساعت ۱۲:۲۹

محتویات

۱ Integrating Asterisk and IBSng
۲ AGI files setting

This service is designed for wholesale providers.

Main steps to install this service are:

Integrating Asterisk and IBSng
To copy AGI files in appropriate path
Configuring asterisk to route calls using IBSng routing profile
Defining customer's user in IBSng

[ویرایش] Integrating Asterisk and IBSng

You can find the document here.

[ویرایش] AGI files setting

Make the path "/var/lib/asterisk/agi-bin" :

# mkdir /var/lib/asterisk/agi-bin/

If you use AGI file copy dial directory from IBSng addons there

# cp -r /usr/local/IBSng/addons/asterisk/dial /var/lib/asterisk/agi-bin/

And if you use FastAGI copy dial directory from Pars Pooyesh Server , /home/ISP

# scp /home/ISP/VOIP/asterisk/Fastagi/dial.tar.gz  root@ ip asterisk:/var/lib/asterisk/agi-bin/

After transfer files check in asterisk server

# cd /var/lib/asterisk/agi-bin/

And extract files, there

# tar -zxvf dial.tar.gz

Create a link from "/var/lib/asterisk/agi-bin" to "/usr/share/asterisk/agi-bin":

# ln -s /var/lib/asterisk/agi-bin /usr/share/asterisk/

[ویرایش] What does dial directory do?

Actually, Dial directory is a python module. It includes an configuration file, defs.py, that we should set some fields in it based on the service we want to use.

[ویرایش] Editing ibs_agi.py

For Wholesale Service, we should edit the following fields:

IBSNG_SERVER=("IBSng IP Address",1235)

[ویرایش] Config Asterisk to establish calls, collaborating with IBSng

Edit "/etc/asterisk/extensions.conf" and append these contexts:

[incoming]
exten => _XXXXXXX.*,1,DeadAGI(dial/ibs_agi_starter.py|SIP/${EXTEN})
include => ibs_users

[ibs_users]
switch => Realtime/ibs_users

[ویرایش] Editing sip.conf

Edit "/etc/asterisk/sip.conf" and append these contexts:

 [general]
 context=incoming
 allow=g729
 allow=ulaw
 dtmfmode = rfc2833

[ویرایش] Edit Manager.conf

Edit "/etc/asterisk/manager.conf":

[asterisk]
secret=asterisk  
deny=0.0.0.0/0.0.0.0  
permit=127.0.0.1/255.255.255.255
permit=<IBSng Ip Address>/255.255.255.255
read = system,call,log,verbose,command,agent,user,config,originate,all
write = system,call,log,verbose,command,agent,user,config,originate,all

[ویرایش] Important Note:

1-If you use Asterisk 1.6.x, you should set "AGI" instead of "DeadAGI"
2- Run this command manually and put it in rc.local

screen -d -m python /usr/share/asterisk/agi-bin/dial/ibs_agi_starter.py

[ویرایش] Restart Asterisk

Finally you have to restart Asterisk service to apply the changes.

LOG_FILE="/var/log/asterisk/ibs_dial_agi.log"

Asterisk Wholesale Service

نسخهٔ کنونی تا ‏۱۶ ژانویهٔ ۲۰۱۳، ساعت ۱۲:۲۹

محتویات

[ویرایش] Integrating Asterisk and IBSng

[ویرایش] AGI files setting

[ویرایش] What does dial directory do?

[ویرایش] Editing ibs_agi.py

[ویرایش] Config Asterisk to establish calls, collaborating with IBSng

[ویرایش] Editing sip.conf

[ویرایش] Edit Manager.conf

[ویرایش] Important Note:

[ویرایش] Restart Asterisk

ابزارهای شخصی

گویش‌ها

فضاهای نام

جستجو

عملکردها

بازدیدها

گشتن

جعبه‌ابزار

@@ سطر ۱: / سطر ۱: @@
 [[Category:VoIP]]
+<div dir=rtl lang=en>
+__TOC__
+</div>
 <div dir=ltr lang=en>
 This service is designed for wholesale providers.
@@ سطر ۹: / سطر ۱۲: @@
 * Configuring asterisk to route calls using IBSng routing profile
 * Defining customer's user in IBSng
-<br>
 == Integrating Asterisk and IBSng ==
 You can find the document [[Asterisk_and_IBSng_Integration|here]].
@@ سطر ۱۵: / سطر ۱۷: @@
 == AGI files setting ==
-Make the path "/var/lib/asterisk/agi-bin" and copy dial directory from IBSng addons there:
+Make the path "/var/lib/asterisk/agi-bin"  :
   # mkdir /var/lib/asterisk/agi-bin/
+If you use AGI file
+copy dial directory from IBSng addons there
   # cp -r /usr/local/IBSng/addons/asterisk/dial /var/lib/asterisk/agi-bin/
+And if you use FastAGI
+copy dial directory from Pars Pooyesh Server , /home/ISP
+ # scp /home/ISP/VOIP/asterisk/Fastagi/dial.tar.gz  root@ ip asterisk:/var/lib/asterisk/agi-bin/
+After transfer files check in asterisk server
+ # cd /var/lib/asterisk/agi-bin/
+And extract files, there
+ # tar -zxvf dial.tar.gz
 Create a link from "/var/lib/asterisk/agi-bin" to "/usr/share/asterisk/agi-bin":
-  # ln -s /var/lib/asterisk/agi-bin /usr/share/asterisk/agi-bin
+  # ln -s /var/lib/asterisk/agi-bin /usr/share/asterisk/
 ==== What does dial directory do? ====
 Actually, Dial directory is a python module. It includes an configuration file, defs.py, that we should set some fields in it based on the service we want to use.
-==== Editing defs.py ====
+==== Editing ibs_agi.py ====
 For Wholesale Service, we should edit the following fields:
@@ سطر ۴۲: / سطر ۵۷: @@
   switch => Realtime/ibs_users
 <br>
+====Editing sip.conf====
+Edit "/etc/asterisk/sip.conf" and append these contexts:
+  [general]
+  context=incoming
+  allow=g729
+  allow=ulaw
+  dtmfmode = rfc2833
+====Edit Manager.conf====
+Edit "/etc/asterisk/manager.conf":
+ [asterisk]
+ secret=asterisk
+ deny=0.0.0.0/0.0.0.0
+ permit=127.0.0.1/255.255.255.255
+ permit=<IBSng Ip Address>/255.255.255.255
+ read = system,call,log,verbose,command,agent,user,config,originate,all
+ write = system,call,log,verbose,command,agent,user,config,originate,all
 ====Important Note:====
-If you use Asterisk 1.6.x, you should set "AGI" instead of "DeadAGI"
+-If you use Asterisk 1.6.x, you should set "AGI" instead of "DeadAGI"
 <br>
+- Run this command manually and put it in rc.local
+ screen -d -m python /usr/share/asterisk/agi-bin/dial/ibs_agi_starter.py
 === Restart Asterisk ===