مشاهدهٔ منبع برای Cisco-Vpdn

<div dir=ltr>
 '''AAA Configuration:'''
  aaa new-model
   aaa authentication ppp ibs group radius
   aaa authorization network ibs group radius
   aaa accounting delay-start
   aaa accounting update periodic 1
   aaa accounting network ibs start-stop group radius

 '''RCMD configuration:'''
  no ip rcmd domain-lookup 
  ip rcmd rsh-enable
  ip rcmd remote-host root 172.16.16.1 root enable

 '''VPDN Configuration:'''
  vpdn enable

 '''Note'''
  In some IOSes vpdn-group can be define and some others bba-group:

 '''VPDN-GROUP as PPPOE concentrator:'''
  vpdn-group pppoe
   accept-dialin
   protocol pppoe
   virtual-template 1

 '''VPDN-GROUP as PPTP concentrator:'''
  vpdn-group pptp
   Default PPTP VPDN group
   accept-dialin
   protocol pptp 
   virtual-template 2  
 
 '''BBA-GROUP as PPPOE concentrator:'''
  bba-group pppoe global
   virtual-template 1 
   sessions max limit 1400
   sessions per-vc limit 1400
   sessions per-mac limit 1400
   sessions per-vlan limit 1400

 '''INTERFACE VIRTUAL-TEMPLATES:'''
  interface Virtual-Template1
   mtu 1492
   ip unnumbered FastEthernet0
   ip route-cache policy
   ip policy route-map cache
   peer default ip address pool <pool name>
   ppp authentication ms-chap chap pap ibs
   ppp authorization ibs
   ppp accounting ibs
   sessions auto cleanup
   sessions max limit 6000



 '''RADIUS CONFIGURATION:'''
  radius-server attribute 44 include-in-access-req
  radius-server host 172.16.16.1 auth-port 1812 acct-port 1813 
  radius-server key <radius secret>
  radius-server vsa send accounting
  radius-server vsa send authentication
  radius-server source-ports extended



 '''POD Sample :'''
 NOTE: Use same key as you have been set for radius server   
 NOTE: RSH setting is no longer needed if you are using  POD 
 NOTE: Make sure ras attribute cisco_kill_user_by_radius in IBSng ras setting is set to 1
 aaa pod server server-key 0 IBS_KEY auth-type any
 (Replaced by in 12.4
 aaa server radius dynamic-author
 server-key IBS_KEY
  auth-type any)
</div>